QR Code
About Us
Products
Contact Us
Phone
E-mail
High-precision digital display type Laser displacement distance sensor
Product Characteristics:
Part number：FSD23-100-AV
Measurement center distance：100mm
Measurement range：±50mm
Linearity:±0.1%F.S.
Repeatability：20μm
Control output：NPN/PNP max.100mA/DC30V ((Residual voltage 1.8 V max.)
Analog voltage output：Output 0-10V , output impedance 100Ω
Protection：IP67
Operating Temp./Humid.：-10~50⁰C / 35 ~ 85% RH without freasing or condensation
Precise measurementcapabilities
High-precision CMoS sensor with unique algorithmsUltra-high linear accuracy for non-contact, wear-freemeasurements.
Panelintroduction:
20 um high resolution
The ease of use of high-precision measure-ment with a resolution of up to 6.0 um andthe digital LED display make it useful for useat various production sites around the world
Digital display
It is easy to check the amount of displace-ment and set it at the same time.
IP67 protection construction
With lP67 protection, it can be used even inenvironments with a lot of moisture anddust. A metal liner is installed in themounting hole, and it can be firmly circum-ferentially circumferentially circumferentiallywith a torque of 0.8 N.m.
Easy to install
The functions of the controller are all inte-grated into the sensor, so there is no need toinstall a separate controller, which saves therequired space.
NPN/PNP polarity is supported
By switching the button, NPN/PNP polarity canbe applied to one product, which reduces thenumber registration for service and mainte.nance.
Analog wiring:
Application Showcase:
Gripper distance measurement
Dispensing needlepositioning detection
Board height monitoring
Automatic torch height control
Product Display:
Product dimensions:
Modes and basic operations:
How to switch between modes
Press the "ZERO/RUN" button once to return to detection mode.When the "MANUAL" indicator is in basic setting mode or detailedsetting mode, the indicator light is on.
How to set the parametervalue
"+" and "One" buttons: Set the selection of itemsAdjustment of the set value."ZERO/RUN" button: Press once to go backDetection mode.
Specifications:
Analog current
4-20mA
Analog voltage
0-10V
Laser indicator: Green / Zero reset indicator: Red
Output indicator: Orange / Mode indicator: Red
Part number
FSD23-15-AA
FSD23-35-AA
FSD23-100-AA
FSD23-150-AA
FSD23-15-AV
FSD23-35-AV
FSD23-100-AV
FSD23-150-AV
RS-485 communication
FSD23-15-RS485
FSD23-35-RS485
FSD23-100-RS485
/
Cable typers-485 communication
/
/
/
FSD23-150-RS485
Center of measurement range
15mm
35mm
100mm
150mm
Measurement range
±5mm
±15mm
±50mm
±100mm
Light source
Medium. Wavelength
Red laser Diode (wave length 650nm)
Max. output power
390 μW
1mW
Laser class
IEC/JIS
Class1
Class2
FDA
CLASS I
CLASS II
Spot size*1
0.5*0.7mm
0.45*0.80mm
0.6*0.7mm
0.5*0.55mm
Linearity
±0.1% F.S.
±0.1% F.S.
±0.1% F.S.
±0.5% F.S.
Repeatability*2
1μm
6μm
20μm
60μm
Sampling period
500μs / 1000μs / 2000μs / 4000μs / AUTO
Temperature drift (typical value)
±0.02% F.S./⁰C
±0.02% F.S./⁰C
±0.05% F.S./⁰C
±0.08% F.S./⁰C
Indicator
MF (multiple function ) Input
Laser OFF, Teaching, Sample & Hold, One shot, Zero reset
Control Output
NPN/PNP max.100mA/DC30V ((Residual voltage 1.8 V max.)
Current consumption
70mA max.
Analog current
Output 4-20mA, allowable load resistance below 300Ω
Analog voltage
Output 0-10V , output impedance 100Ω
Protection circuit
Reverse connection protection, Over current protection
Protection category
IP67 including connection part
Operating Temp./Humid.
-10~50⁰C / 35 ~ 85% RH without freasing or condensation
Storage Temp./Humid.
-20 ~ 60⁰C / 35 ~85%/RH
Ambient illuminance
Sun light: 20,000 lx max. / Incandescent lamp: 3,000 lx max.
Vibration resistence
10 ~ 55Hz, Double amplitude 1.5mm, X,Y,Z for 2 hours
Shock resistence
500mm/s2 ( approx. 50G) X,Y,Z 3 times each
Material
Aluminum
Weight
Approx. 60g
The specifications are based on the condition unless otherwise designated:Ambient temperature:23⁰C,
Supply voltage: 24VDC, Sampling period: 500 μs, Averaging: 64,Measuring distance:Center of range, Testing object: White ceramic
*1 Defined with center strength 1/e2(13.5%)at the center. There may be leak light other than the specified spot size. The sensor may
be affected when there is a highly reflective object close to the detection area.
*2 512 averaging time
Small stature and strong functionality
A variety of core functional benefits for your use
Address
No. 22, Hongyuan Road, Guangzhou, Guangdong Province, China
Tel
