QR Code
About Us
Products
Contact Us
Phone
E-mail
Performance Characteristics:
Accurate measurement Stable detection.
Adopting unique algorithm, it can realize stable and reliable detection of tiny objects, ensuring accurate and reliable data for measurement and monitoring.
Good EMC characteristics, no fear of electromagnetic, electrostatic interference, to ensure the true reliability of the measurement data.
Adopting automatic gluing process, the product is well sealed and can be immersed in 1m deep water for 30 minutes to meet the requirements of complex working conditions.
Convenient operation panel can quickly complete all the functions of the setup, while with LED digital display, the detection data at a glance;
Standard RS485 communication output and NPN or PNP output, with analog current/voltage output options, to meet a variety of needs.
Product Parameters
|
Model |
4-20mA+RS485 + Switch volume |
FSD26-30-AR |
FSD26-50-AR |
FSD26-85-AR |
FSD26-195-AR |
|
0-10V+ RS485 Switch volume |
FSD26-30-VR |
FSD26-50-VR |
FSD26-85-VR |
FSD26-195-VR |
|
|
Reference distance |
30mm |
50mm |
85mm |
195mm |
|
|
Measuring range |
±4mm |
±10mm |
±15mm |
±99.98mm |
|
|
Spot size |
Near end |
80*180um |
120*230um |
150*600um |
230*600um |
|
Reference distance |
70*260um |
110*440um |
140*990um |
430*2000um |
|
|
Far end |
100*400μm |
150*670um |
190*1200um |
700*3300um |
|
|
Repeat accuracy |
2um |
5um |
10um |
50um |
|
|
Linear accuracy |
± 0.1% F.S.(±0.008mm) |
± 0.1% FS. (±0.02mm) |
± 0.1% FS.(±0.03mm) |
± 0.1% FS. (±0.2mm) |
|
|
Temperature characteristics |
0.05% of F.S. /C |
||||
|
Light source type |
Light source wavelength: 655nm; laser grade: 2 categories; laser output power.
1mw |
||||
|
Sampling frequency (Hz) |
500/1000/2000/3000Hz (4 levels can be selected) |
||||
|
Input/output |
Communication port |
1 RS485 (support ModbusRTU) |
|||
|
Analog output |
1 analog output, analog voltage (0-10V) or analog current (4-20mA) Analog voltage or analog current cannot be switched. |
||||
|
IO input |
1 route, support laser shutdown, remote teaching, sampling maintenance, singlepulse triggering, zeroing and other functions |
||||
|
IO output |
<NPN output type> NPN open-circuitcollector transistor Maximum inflow current: 50mA Added voltage: below 30vDC (betweencontrol output -0V) Remaining voltage: less than 1.5V(under 50mA inflow current) Leakage current: less than 0.1mA |
<PNP output type> PNP open-circuitcollector transistor Maximum inflow current: 50mA Additional voltage: 30VDC or less(between control output +V) Remaining voltage: less than 1.5V(under 50mA inflow current) Leakage current: less than 0.1mA |
|||
|
Use environment |
Working temperature: -10~50℃; Storage temperature: -20~60℃;Workinghumidity: 35%-85% no condensation, no frosting |
||||
|
EFT protection |
Power port 2kV/5 or 100kHz, signal port 1kV/5 or 100kHz, conforming to lEC61000-4-4 standard |
||||
|
ESD protection |
Contact discharge 4kV, air discharge 8kV, conforming to lEC 61000-4-2 standard |
||||
|
Vibration |
10-55Hz, double amplitude 1.5mm, 2 hours each in X, Y and Z directions |
||||
|
lmpact |
500m/s2 (about 50G), 3 times each in the direction of X, Y and Z |
||||
|
ip level |
IP67. conforms to lEC 60529 standard |
||||
|
Size (mm) |
60*50*22 |
||||
|
Weight (including cables) |
120 grams |
||||
Address
No. 22, Hongyuan Road, Guangzhou, Guangdong Province, China
Tel
